Welcome to M/s Consultants & Engineers

We are a group of Engineers and Professionals with wide and diversified experience in India and abroad formed at the beginning of 1990 with an intention to fill the gap in Quality Engineering Services in the growing industrial scenario in India.

POLLUTION CONTROL SYSTEM

It provides packaged waste water treatment plants and equipment for activated industrial sludge treatment.

PROJECT MONITORING

Effective planning, monitoring & control in project management is extremely important in order for a project to be successful.

BANKABLE FEASIBILITY REPORT

We conduct Techno-Economic Feasibility Studies for a wide variety of industries.

BASIC AND DETAIL ENGINEERING

Process Design
Mechanical
Electrical & Instrumentation
Civil and Structural Design.

TURN KEY PROJECTS

A turn-key or a turn-key project is a type of project that is constructed by a developer and sold or turned over to a buyer in a ready-to-use condition.

INSPECTION AND QUALITY ASSURANCE

Our standard outlines a Quality Assurance (QA) plan for internally and externally threaded fasteners and accessories or associated parts.

Our Work

Guwahati Carbons Ltd. – Expansion Project of existing Plant capacity from 60000 to 90000TPA

Summary of Activities are as follows : System Design and detail design to hook up with existing system Detail design…

Paradeep Carbons Ltd. – 100000 T.P.A. Calcined Petroleum Coke Project.

Summary of Activities are as follows : Project including system Design Civil & Structural Detail design. Site supervision for Erection…

Chittorh Cement Project

Summary of Activities are as follows : System Design Detail Engineering for the Clinker Grinding Project by means of Bag…

Hindustan Zinc Ltd. Chandiyara Project

Summary of Activities are as follows : Preparation of Layout drawing and detail drawings for utility piping

National Cement Mills Ltd. – 1×800 T.P.D Clinker Grinding unit at Chittagong Bangladesh

Summary of Activities are as follows : System Design , Detail Engineering, Selection of Plant & Equipment, Preparation of Detail…

Dubai Aluminium Project

Summary of Activities are as follows : Design & detail Engg. for Anode Rod Handling Machine.

Electrosteel Casting Ltd – Ductile Iron Pipe Project

Summary of Activities are as follows : Design & Development of Special Purpose Machine as follows: Zinc Coating Machine. Abrasive…

Utility piping of Continuous casting machine and rolling Mill for M/s Bhushan Steel Ltd. Angul

Summary of Activities are as follows : Detail drawings for Hydraulic and other utility piping for CCP and Rolling Mill

Coal Handling Plant of Western Coal Field

Summary of Activities are as follows : Design & detail Engineering Of Travelling Tripper Shuttle Conveyor Coal Sampler.

Testimonials

I have worked with Consultants & Engineers on several projects over the years. They are excellent engineers and are great project leaders. I am confident that every project we work on together will be performed in an expeditious and professional manner. Furthermore, knowing their firm is on a project team gives me comfort that we will achieve our goals.

L&T

M/S Consultants & Engineers was a joy to work with. They are excellent engineers and I look forward to delivering more great projects with them in the future. Responsive, thoughtful and easy to work with--good traits to have in your sub consultants.

MACNALLY BHARAT

Thorough, Responsive, Professional. Consultants & Engineers understands the demands and obstacles of the real industry and consistently provides savvy and efficient consultation and design.

HINDUSTAN MACHINE TOOLS LTD.

As an owner's rep and having worked with engineering companies all my professional life, Consultants & Engineers is among the best of the best!

PARADEEP CARBONS LTD

Services

Preparation of Techno-Economic Feasibility Reports

Our professionals gauge the feasibility of the project on the technical and economic front for our esteemed clients. They asses every limitation vis-a-vis technology and the economic benefits it can provide our clients with in order to guide them in the right direction. The assessment or the analysis is primarily done on the basis of the industrial standards and organizational structure of the clients.

Basic and Detail Design in Pyro-processing System

The key step is "electrorefining," which removes uranium, plutonium and the other actinides (highly radioactive elements with long half-lives) from the spent fuel, while keeping them mixed together so the plutonium cannot be used directly in weapons. Spent fuel from reactors that use metallic uranium fuel can go straight to the electrorefiner. Spent fuel from commercial reactors, which consists of uranium oxide, would first undergo an "oxide reduction" step to convert it to metallic form. Next, the uranium and other actinides are sent to the cathode processor to remove residual salts and cadmium from electrorefining. The actinides are cast into fresh fuel, while the salts and cadmium are recycled back into the electrorefiner.

Basic and Detail Design in Material Handling System

Material Handling Equipment traditionally consisted of trolleys, conveyors, forklifts, overhead travelling cranes etc. These were primarily devices of Mechanisation; a lot of manual intervention was involved. These had limitations like low speed, handling problems like scratches, chipping, breaking, difficulty to monitor material flow etc. However, they were adequate in mass production with limited variety or low volume production. Customers were tolerant of defects like scratches, dents etc. With transformation of manufacturing systems to be lean, agile and highly automated, things are changing. Increased competition increases variety of components (for product customisation ), reduces lot size, varies product mix continuously ( pull type manufacturing ).

Pollution Control System

Basic and Detail Design in Pollution Control System - We offer a comprehensive range of air pollution control systems, which are designed by us using cutting edge technology. Available in standard as well as customized specifications, these systems meet the varied requirements of air handling applications in various industries like:

About Us

M/s CONSULTANTS & ENGINEERS is a group of Engineers and Professionals with wide and diversified experienced in India and abroad, formed at the beginning 1990 with an intention to fill the gap in Quality Engineering Services in the growing industrial scenario in India.Till date, we have rendered services in the following field to leading Engineering organizations like M/s L&T, Khaitan Group, Mcnally Bharat, SAIL etc.as mentioned below.

  • Preparation of Techno-Economic Feasibility Reports.
  • Basic and Detail Design in Pyro-processing System.
  • Basic and Detail Design in Material Handling System.
  • Basic and Detail Design in Pollution Control System.
  • Trouble-shooting and production optimization.
  • Design and Development of special Purpose Machine.

Team Members

Asoke Basu

Proprietor

41 Years Experience

Academic Qualification : B.E (Mech)

Experience Summary

18yrs. Associated with D.C.L. in the field of Chemical & Cement Industries for Design, Trouble shooting in the field.

Major Project Handled

  • Design, Commissioning of 1x750 T.P.D. Cement Project,Hetauda,Nepal.
  • Operation & Maintenance for 1x3000 T.P.D Cement Plant at Libya.
  • Maintenance & Trouble shooting in Rashadiya Cement Plant,2x3000 T.P.D. - Jordan.
  • Design & Detail engineering for the expansion Project of M/s Lubris oil India Ltd.

    Arup Bhaduri

    Senior Engineer

    33 Years Experience

    Academic Qualification : B.E (Elect)

    Experience Summary

    Associated with D.C.L. for Maintenance Design and Detail Engineering of H.T. and LT. System.

    Major Project Handled

    • 8yrs. In Lebda 1x 3000 T.P.D Cement Plant in Libya for Maintenance.
    • Kolaghat Thermal Power Station Material handling L.T. Distribution System.
    • H.T Power receiving and Distribution system for Bakreswar Thermal Power Station.

      Pranesh chandra Debnath

      Engineer

      28 Years Experience

      Academic Qualification : B.E (Elect)

      Experience Summary

      Experiencd in the field of Structural Design. 5yrs. With M/s Otto India ltd. for Design and Detail Engineering of Structural jobs for Coke oven battery.

      Major Project Handled

      • Renovation of Rebuilding of Tall oven for D.S.P.
      • Design of stamp charging battery for TISCO.

      15yrs. With M/s M.N.Dastur & Co. for Design and Detail engineering of Structural jobs in Steel Plant.

      Major Project Handled

      • Structural Design of sintering Section of D.S.P.
      • Structural Design of Rourkella Steel Plant continuous Casting Section.

        Contact Us

        • Address
          2/1C, Sebak Baidya Street,
          Kolkata-700029, West Bengal, India
        • Email
        • Phone
          +913324550551